CLOSE THE WATER PIPE
Your kitchen or bathroom faucet might feature a single or double handle, a contemporary pull-down wand style, or a rotating ball faucet for your shower or bathtub. Turn off the water supply before you start trying to fix a leaky faucet. To stop the water supply, turn the valve beneath your sink. Turn off the home’s water supply if the sink doesn’t have a separate shutdown valve. To let the last of the water in the line drain into the sink, turn on the faucet and leave it open. Know more about new west
TAKE THE HANDLE OFF
A leaking bathtub or shower faucet’s handle needs a little more effort to remove. Use a flathead screwdriver to remove any caps that may be on the handle. To remove the handle, use a Phillips screwdriver.
Take off the faceplate from the shower wall that is behind the handle. Remove the faceplate from the wall by unscrewing it if it has threads.
Look for the metal covering covering the shower valve. Take it off or turn it loose. Use a screwdriver or needle nose pliers to pry off any locking clips on the shower valve.
REMOVE THE STEM AND CARTRIDGE
The majority of two-handled kitchen and bathroom faucet types have a cartridge or stem. This component controls how much hot and cold water flows. Loosen the packing nut in the handle assembly using a wrench, then take it out and put it away. Pull the item straight up and out of the assembly with little pressure.
SET UP A NEW CARTRIDGE
Since stems and cartridges come in a variety of sizes and forms, knowing the model number and name of the faucet maker will make it the simplest to locate the appropriate replacement part. In case you are uncertain, bring the outdated cartridge or stem you intend to replace to the store and utilize a reference guide to ensure it matches the precise cartridge you require. Using a cleaning solution and cloth, thoroughly wipe and dry the area surrounding the handle and all of the components.
Examine the seals surrounding the housing. Replace any that are worn out or damaged. Make sure that the replacement stem or cartridge is properly positioned before inserting it.
FIX THE FAUCET HANDLE AGAIN
Reattach the faucet handle by following the preceding instructions after installing the replacement cartridge or stem. After cleaning your sink and removing any dirt or towels, turn on your water line again.
To make sure your aerator isn’t blocked, run both hot and cold water through your faucet for a few minutes. The component that screws onto the faucet spout’s end is called the aerator. If accumulation is preventing the water from flowing continuously, it is simple to remove and clean. While replacing a faucet or doing plumbing repairs may need some time and work, having the proper equipment is crucial.
